ProMAXX Marine

View Original

How To Use Compounds Properly

When the sides of your boat have suffered from UV damage, you will notice a fade to the gloss and a lack of definition and color, even on white hulls. The objective of ProMAXX Marine products is to bring that definition back and restore the hull to factory finish quickly.

How To Use Compounds Properly

1. To begin, add a small amount of compound on the pad versus the side of the boat. That keeps the compound moist not allowing it to dry out. This ensures it spreads more evenly while in use.

2. Place your buffer on the surface of your boat and once in contact turn your buffer on and polish vertically first and then horizontally second Be sure to alternate back and forth to cover roughly a two foot by two foot section.

3. In less than 60 seconds, you will have cleaned the surface and hull of your boat back to a stunning, wet-look finish.

Necessary Tools

You can use a random orbital buffer, rotary buffer or even a handheld buffer/polisher which can be picked up at any home center or retail store.  ProMAXX Marine recommends 3,000/3,500 RPM. 

What Makes ProMAXX Marine different?

Unique with the ProMAXX Marine Repair Compound phz_1 is a synthetic gloss compound. While in use, it starts out towards the aggressive side to remove dirt, scratches and UV damage. But as you continue to buff the phz_1 gloss compound is designed to break down quickly into smaller and finer particles which will remove any remaining swirl marks, bringing the surface to an absolute brilliant shine.  Use it just once or for any

ProMAXX Marine Repair Compound phz_2 is a synthetic polymer coating to protect your new or restored boat finish.  Unlike carnauba based waxes and blends that deteriorate quickly and don’t build, phz_2 cures in sunlight and the more you apply, the more protection you obtain.

ProMAXX Marine phz_3 is a synthetic glaze, use to continue to clean and renew your boats finish year two and beyond.  Use every season after your phz_1 compound use. 

The ProMAXX Marine Maintenance System is a terrific all-in-one solution for keeping your boat clean and protected against saltwater, wind damage and ultraviolet light throughout the season. This kit comes complete with high quality large microfiber towel, microfiber applicator, bottle of phz_1 and phz_2 all packaged in a neat storage pack.